 |
Seat Safety Switch (Operator Presence Detection) using Hall sensor technology
Waterproof seat switch for outdoor & industrial seating environments
High sensitivity Seat Kill / Seat Kill seat kill switch output (0.5–4.5V DC)
Ultra-low power consumption (2–10mA, 2–10 mA)
Wide temperature support (-40°C to +80°C)
Reliable 320mm wiring harness, 320 mm wiring harness
Safety switch for lawn mower applications and industrial seats
| Quantity: | |
|---|---|
OPS770B
A Seat Safety Switch is a critical operator presence detection device that signals when a seat is occupied. This Hall-based seat kill seat kill sensor uses a magnetic field rather than mechanical pressure, ensuring:
no mechanical wear
faster response
higher reliability
immunity to dust, water, vibration and vibration
By monitoring seat occupancy through Hall high-sensitivity Hall Hall sensor, Model OPS770B provides real-time presence feedback for industrial, agricultural, and outdoor seat safety systems.
Model OPS770B is a Hall high sensitivity seat switch.
This model is waterproofed, can be used on outdoor seats.
The wide range of operating temperature allows this switch to be used in many harsh environments.
Rated voltage from -8.5V to 8.5V DC, recommend operating voltage from 4.5V to 5.5V DC.
Part No.: | OPS770B |
Features: | • DTM04-3P • Rated Voltage:-8.5V~8.5V DC • Recommend Operating Voltage:4.5V~5.5V DC • Output Voltage:0.5V~4.5V DC • Supply Current Consumption:2-10 mA • Operating Temperature:-40~+80° • Wire Length 320 mm |
This sensor-based Seat Safety Switch supports a wide range of non-brand specific equipment such as:
riding lawn mower seat safety switch replacement
mower seat switch integration
tractor seat safety switch control systems
tractor seat switch integration
riding mower seat safety switch for operator safety
outdoor seat detection for rugged seating modules
safety switch riding mower systems
safety switch for lawn mower presence monitoring
riding mower safety switch circuits
tractor seat switch for harsh environments
seat kill switch system triggers
tractor seat safety switch system triggers
mower seat safety switch
Model OPS770B uses a magnetic sensing Hall sensor input to detect occupancy and relay a voltage signal. Wiring includes a 320mm 320 mm lead, a 320 mm lead providing flexibility for seat mounting in:
outdoor vehicles
industrial seats
agricultural tractors
This non-mechanical design improves durability and keeps response stable in:
rain
vibration
extreme heat
freezing cold
Model OPS770B complies with European regulatory standards and is trusted in B2B environments for:
accuracy
voltage versatility
resilience
safety integrity
Our sensor does NOT include brand-locked adaptions, making it a universal magnetic seat presence detection switch for safety-critical seat systems used in both outdoor and industrial seating environments.
No. This is a Hall Hall Effect Seat Occupancy Sensor-based Switch, sensor-based seat kill switch that senses magnetic field changes, avoiding mechanical wear.
Yes. Model OPS770B is fully waterproofed for outdoor seat systems with wide temperature tolerance (-40°C to +80°C).
Model rated voltage supports -8.5V to 8.5V DC, with recommended operating voltage of 4.5V–5.5V DC.
A Seat Safety Switch is a critical operator presence detection device that signals when a seat is occupied. This Hall-based seat kill seat kill sensor uses a magnetic field rather than mechanical pressure, ensuring:
no mechanical wear
faster response
higher reliability
immunity to dust, water, vibration and vibration
By monitoring seat occupancy through Hall high-sensitivity Hall Hall sensor, Model OPS770B provides real-time presence feedback for industrial, agricultural, and outdoor seat safety systems.
Model OPS770B is a Hall high sensitivity seat switch.
This model is waterproofed, can be used on outdoor seats.
The wide range of operating temperature allows this switch to be used in many harsh environments.
Rated voltage from -8.5V to 8.5V DC, recommend operating voltage from 4.5V to 5.5V DC.
Part No.: | OPS770B |
Features: | • DTM04-3P • Rated Voltage:-8.5V~8.5V DC • Recommend Operating Voltage:4.5V~5.5V DC • Output Voltage:0.5V~4.5V DC • Supply Current Consumption:2-10 mA • Operating Temperature:-40~+80° • Wire Length 320 mm |
This sensor-based Seat Safety Switch supports a wide range of non-brand specific equipment such as:
riding lawn mower seat safety switch replacement
mower seat switch integration
tractor seat safety switch control systems
tractor seat switch integration
riding mower seat safety switch for operator safety
outdoor seat detection for rugged seating modules
safety switch riding mower systems
safety switch for lawn mower presence monitoring
riding mower safety switch circuits
tractor seat switch for harsh environments
seat kill switch system triggers
tractor seat safety switch system triggers
mower seat safety switch
Model OPS770B uses a magnetic sensing Hall sensor input to detect occupancy and relay a voltage signal. Wiring includes a 320mm 320 mm lead, a 320 mm lead providing flexibility for seat mounting in:
outdoor vehicles
industrial seats
agricultural tractors
This non-mechanical design improves durability and keeps response stable in:
rain
vibration
extreme heat
freezing cold
Model OPS770B complies with European regulatory standards and is trusted in B2B environments for:
accuracy
voltage versatility
resilience
safety integrity
Our sensor does NOT include brand-locked adaptions, making it a universal magnetic seat presence detection switch for safety-critical seat systems used in both outdoor and industrial seating environments.
No. This is a Hall Hall Effect Seat Occupancy Sensor-based Switch, sensor-based seat kill switch that senses magnetic field changes, avoiding mechanical wear.
Yes. Model OPS770B is fully waterproofed for outdoor seat systems with wide temperature tolerance (-40°C to +80°C).
Model rated voltage supports -8.5V to 8.5V DC, with recommended operating voltage of 4.5V–5.5V DC.
